Dong Sung Hydraulic
 Minerals & Metallurgy > Metal Processing Machinery >  rubber injection molding machine

rubber injection molding machine

Place of Origin:
Incheon, South Korea
rubber injection molding machine
 
Detailed Description
 


we are a company making rubber injection molding machine accepted electronic proportional system.
we make machine by OEM.
 CHARACTERISTIC

It is an energy saving machine operated with oil pressure equipment using small power.

Several machines can be installed in small area and install simply.

Owing to low height of working plate, one can easily exchange mold and it is easy to put in and out the products.

Being designed not to make machine overloaded, the span of life of machine is expanded and the injected volume is exactly made by a decimal point and one can produce high accurate goods.

The input equipment of screw and materials is designed specially in order to make materials(rubber) inputted into injection chamber continuously without skipping over.

Regarding heat-media such like injection nozzle, injection chamber and screw cylinder one can control the temperature of the parts of heat-media as using mineral oil according to the hardness of rubber. (for example, in case the hardness of rubber is 55, the temperature should be adjusted like 60°C in nozzle and chamber and so on)

In order to make the safety of machine as the max, using pressure is fixed.

please contact manufacturer of this machine when you need to change the using   pressure.

By the composition of effective and simple oil pressure equipment, it is good for saving energy and maintenance because of preventing oil leakage and reducing the noise and vibration to the minimum.

It is designed to make a control of proper pressure and speed in cylinder working with electronic proportional pump.

The Start S/W and Emergency S/W is equipped in front of worker and for the safety of worker. The operation is stopped by pressing one button among the two buttons when occurring emergent accident But in order to operate the machine, the two buttons of start S/W in left and right side should be pressed at the same time.



We promise to supply you with high quality molding machine!All the above picture is just for your reference, We can provide service according to client's requirements!We promise that all our products are made of top quality materials.If you have any problems about details please contact us.


Company information:
    Dong Sung Hydraulic Was established in 2000 . We is an exporter of South Korea Other Metal Processing Machinery products.    We are especially strict with quality and after-sales service, take Win-Win policy as our highest target, and do our up most to provide products with best.    We are glad to invite you to be our value partner!We welcome you to visit our website at www.dongsunghyd.co.kr!
Hot Searches: Post Forming ,Hot Plywood Press ,Pb Line ,Hot Press Plywood Machine ,Coal Heating Boilers
 
Send Inquiry to this Supplier
 
Dong Sung Hydraulic
Mr. Hyun Keun Kim
682-5,Gyeongseo-dong ,Seo-gu
82-032-566-8256
010-8203-0605

Copyright © 2010 Wholesale lots. All rights reserved. Contact Us:tonyluo2005@gmail.com

Processed in 0.12069 second(s)