Shanghai NSJ Hardware Factory
 Chemicals > Adhesives & Sealants >  CGA-S300 Pneumatic Cualking Gun

CGA-S300 Pneumatic Cualking Gun

Brand Name:
Model Number:
Power Source:
CGA-S300 Pneumatic Cualking Gun
Detailed Description

CGA-S300 Pneumatic Cualking Gun
one-component air caulking gun
Sausage Pack: 300ml
Body Material: aluminium

CGA-S300 Pneumatic Cualking Gun

Description: CGA-S300
one-component air caulking gun
Sausage Pack: 300ml
Body Material: aluminium
Weight: 0.79kg/piece

Packing: 10 cases/carton

Inner packing: 535mmX220mmX70mm

Outer packing: 385mmX500mmX460mm


Operating Instructions:

Load Sealant Pack:

1.Piston Operated Cartridge Applicator

        1) Remove the front cap.

        2) Using the cartridge, push the plunger down the barrel until it will go no further.

        3) Tightly replace the front cap.

2.Sachet Applicator

        1)Ensure the desired nozzle is fitted to the front cap.

        2)Using a new sachet, push the floating plunger down the barrel until it will go no further.

        3)Cleanly cut off the end of the sachet or crimped clip where present.

        4)Tightly replace the front cap.


Operation of the trigger:

By pulling the trigger, a cushion of compressed air builds up inside the applicator to initiate the flow of sealant. On releasing the trigger, the sealant flow ceases as the compressed air escapes rapidly by a silenced quick exhaust valve at the rear of the gun..



  1. Always disconnect the air line prior to dismantling the applicator.
  2. To ensure trouble-free operation of the applicator, it should be wiped clean of all sealant residue after use with the sealant manufacturers recommended solvent.
  3. Front caps should always be secured tightly during use.
  4. It is recommended that safety spectacles are worn when using all pneumatic tools.

 Shanghai NSJ Hardware Ltd. pneumatic caulking gun products line include 300ml ,310ml, 400ml, 600ml air caulking gun.


We supply with all kinds of Air Caulking Gun!All the above picture is just for your reference, We can provide service according to client's requirements!We promise that we will offer you best quality and satisfying after-service.If you have any problems about details please contact us.

Company information:
    Shanghai NSJ Hardware Factory was found in 2007 . We is an exporter of China (Mainland) Construction Adhesives products.    We have exported products to many other countries, such as North America South America Eastern Europe Southeast Asia Africa Oceania Mid East Eastern Asia Western Europe. With a well management system, Sisale strives to offer the best quality products and service as possible as we can, as we believe quality is the value of company. Our motto is 'good quality, competitive prices, and efficient delivery'.    If you are interested in our products ,for more details, please feel free to contact us.Pls visit our website at!
Hot Searches: Gr2 Titanium Ingot ,Titanium Ingots Casting ,Target Price Is ,Astm B367 Titanium Ingots ,Cp Titanium Ingot
Send Inquiry to this Supplier
Shanghai NSJ Hardware Factory
Mr. Guorong Zhou
No2, Room202, 469 FanXing Road, MinHang District

Copyright © 2010 Wholesale lots. All rights reserved. Contact

Processed in 0.12069 second(s)