Shenzhen Guanri Netcom Technologies Co., Ltd.
 Construction & Real Estate > CCTV Products >  VoIP Gateway (2-line FXO and 2-line FXS)

VoIP Gateway (2-line FXO and 2-line FXS)

Place of Origin:
China
Brand Name:
SOL
Model Number:
VOIP-G200
Type:
VoIP Gateway
Port::
shenzhen, China
Packaging Details::
carton package
VoIP Gateway (2-line FXO and 2-line FXS)
 
Detailed Description
 


VoIP Gateway --2 FXS ports & 2 FXO ports
Supports :
peer-to-peer IP calls,
dial plan and caller ID
router function

The VOIP-G200 is mixed gateway of 2-line FXO and 2-line FXS with compact-size and high-performance. The two lines can be configured as different phone numbers or used as a relay gateway.

 

With integrated SIP protocol, it can forward the caller ID from exterior lines, which is an important function of PBX application. Its highly-reliable line detection function can avoid line down failure at maximum degree. And the superior echo cancellation algorithm and balanced circuit design can reduce the echo to the lowest.

 

Offering high-quality voice and stable performance, it is an ideal low-cost solution for PBX vendors, call centers and system integrators.

 

Functions & Features

  • Key Features:
    • Supports open standard VoIP protocols (ITU H.323 V4 and IETF SIP V2);
    • Supports registration of single or multiple servers;
    • Provides two 10/100 Ethernet port for WAN/LAN connections;
    • High voice quality ensured by QoS at the Ethernet and IP layers and comprehensive jitter buffer;
    • Supports echo cancellation for speaker;
    • Supports VLAN and QoS;
    • Supports NAT transversal and router functions;
    • Supports voice prompt, HTTP web, and auto-provisioning (* auto-provisioning server required);
    • Highly stable embedded operating system of Linux with ARM9 processor;
    • Web-based interface: provides parameters setting, multi-layer password, online firmware upgrade, 4-level volume adjustment, voice-speaking IP, toll charging, multi-area prompt tone.
  • FXS Features:
    • 2 RJ-11 ports for traditional phones or PBX’s trunk lines;
    • Supports call forward, call hold and call transfer;
    • Supports dial plan and caller ID;
    • Supports peer-to-peer IP calls;
  • FXO Features:
    • 2 RJ-11 ports for PSTN terminations (PSTN lines or PBX’s extensions);
    • Supports call forward from PSTN to VoIP and VoIP to PSTN;
    • Password protection for both PSTN dial in or dial out;
    • Supports retransmitting PSTN caller ID to VoIP terminal.

 

Specifications

ProcessorARM9 133MHz
DSPVP-101-2 196MHz
MemoryRAM: 16MB, FLASH: 4MB
Interface
  • Power interface: AC220V±15% to DC 24V/500mA
  • Ethernet interface for LAN and WAN: 2 RJ45 ports, 10/100Base-T
  • FXS interface: 2 RJ11 ports (feed at 24V / ring at 48V)
  • FXO interface: 2 RJ11 ports (feed at 24V / ring at 48V)
  • LED indicators: Power, Run, LAN, PC FXO ports and FXS ports
Power ConsumptionMax. 6W
Voice Characteristics
  • Supports G.168 algorithm for echo cancellation (16ms)
  • Supports G.723.1, G.711 (A/µ law), G.729A/B, PLC, CNG, and VAD
  • Supports Package Jitter Algorithm
LAN Port Characteristics
  • Supports DHCP, PPPoE, and Static IP
  • Firewall transversal: relay (* relay server required) or port forwarding
  • Network time: NTP/SNTP
  • 10/100Base-T: 10M/100M adaptive
PC Port Characteristics
  • Supports Static IP and switch mode
  • DHCP service: supports max. 200 clients
  • 10/100Base-T: 10M/100M adaptive
Supported H.323 Protocols
  • ITU-T: H.323 V4, H.225, H.235, H.245 and H.450
  • RFC-1889: RTP/RTCP
  • Supports IP-to-IP
Supported SIP Protocols
  • RFC 2327: Session Description Protocol (SDP)
  • RFC 2833: RTP Payload for DTMF Digits, Telephony Tones and Telephony Signals
  • RFC 2976: SIP INFO method
  • RFC 3261: Session Initiation Protocol (SIP)
  • RFC 3264: Offer/Answer model with SDP
  • RFC 3515: SIP REFER method
  • RFC 3842: A message summary and message waiting indication
  • RFC 3489: Simple Traversal of UDP through NATs
  • RFC 3891: SIP “Replaces” Header
  • RFC 3892: SIP Referred-By mechanism
  • draft-ietf-sipping-cc-transfer-04: SIP call control – transfer
Operating Temperature0°C ~ +45°C
Relative Humidity Range40% ~ 90% (non condensing)
Dimensions167mm X 112mm X 31mm / 275mm X 170mm X 65mm (packing)
Weight175 g / 530 g (packing)

 


We have a very strict quality controling system which promise that VoIP Gateway we produce are always of best quality!Of course , if you have some good ideas that you want us to develop or reproduced, please feel free to send us your product image or design artwork, we are also pleased to become your Original Equipment Manufacture.We carefully select material of each part to promise our products quality.We are sincerely looking for your cooperation!


Company information:
    Our company name is Shenzhen Guanri Netcom Technologies Co., Ltd. Which established in 2007 . We is an exporter of China (Mainland) CCTV System products.    Our products have been sold well in North America South America Eastern Europe Southeast Asia Africa Oceania Mid East Eastern Asia Western Europe! Our company firmly insists on that product quality is the life source of an enterprise.    If we don't have idea of what you're looking for, please call or e-mail with your ideas and we may be able to make you something completely unique!Please vist our website at www.solnetcom.com and use the contact form for a faster response!
Hot Searches: G20cr2ni4 ,Chrom Bearing Steel ,Bearing Steels ,Discharge Clothe ,Solar Battery Meters
 
Send Inquiry to this Supplier
 
Shenzhen Guanri Netcom Technologies Co., Ltd.
Ms. Chase Wan
3/F, Building R3-B, High-Tech Industrial Park, Nanshan district, Shenzhen 518057 P.R.China
86-0755-26520916

Copyright © 2010 Wholesale lots. All rights reserved. Contact Us:tonyluo2005@gmail.com

Processed in 0.12069 second(s)