It is used for treating the unqualified turbine oil, especially the seriously emulsified turbine oil.
It is used for treating the unqualified turbine oil, especially the seriously emulsified turbine oil. This products, which can rapidly and effectively remove the water, gas and impurities, break emulsification. It aims at turbine oil’s nature of high water content, easy emulsifiable and high impurity content, and makes the oil recover the new oil's nature.
1. Breaking emulsification thoroughly with high- molecule polymeric material.
2. Dewatering very effectively with once and for two steps dehydrating method. It can thoroughly clear away the liquid water, free water and 80% dissolved water.
3.With distinctive removing impurities technique filtering through double FH trapezoidal network and absorbing by high polymer material, this machine can make the ß3 equal or surpass 200 and make the cleanness lower grade 6(NAS1638).
4.With the trapezoidal, spiral, automatic back flushing system.
5.With the advanced dielectric condensation devices.
6.On-line oil purification can be carried out with turbine or water turbine automatically without any person.
This machine breaks emulsification thoroughly, and the oil is very difficult to emulsify again after treatment. Its dehydration volume is large and it can absorb water on line. TY series, which prevent lubrication system from damage, can effectively extend the lifetime of oil and protect turbine and other machines.
Table1 Technical Parameters
Working vacuum degree
0.06 ~ 0.095
40 ~ 70(the temperature of turbomachine below 55°C)
Table2 Guarantee Data after Purification
Break emulsification value
≤15min (GB/F 7305)
Copyright © 2010 Wholesale lots. All rights reserved. Contact Us:firstname.lastname@example.org
Processed in 0.12069 second(s)