TECHNICAL SPECIFICATION OF FUEL TANK
Body sac profile is produced of ST-37 4mm sac.2 wave-braker are replaced in the tank that made of ST-37 quality and 4 mm .Also tank taps are made of 5 mm ST-37 quality sac.nner and outer are welded in order not to leaking.A rolled chassis is under the tank replaced,6 mm
FILLING AND EMPTEEING SYTEM
A pressure vacuum safety vent is replaced that unleak gasket and mennole tap.Provides tank filling upper side.Fuel pump takes its start with gear connected to PTO shaft sytem.Pump capacity is 5,00 lt/min, and maximum working pressure 10 bar.There is a T type filter that 12 bar working pressure.A counter-flow rate minumum 70lt/min and maximum 700 lt/min-
Located on exist line of fuel pump.A hose roller machine that -20 meters rolled- on counter
Exist.Also a hose gun in front of the hose.
1 Unit Wardrobe(gadget)
1 Unit on the tank unslip walking platform
2 Units PVC Pipe for empteing hose
2 Units mudguard and gaiter.
Before painting a cleaning is made with special chemistry alloy.2 times epocsi undercoat and last paint.
Manufactured equipments are guaranteed 1 year for all mulfuntions.
Copyright © 2010 Wholesale lots. All rights reserved. Contact Us:email@example.com
Processed in 0.12069 second(s)