Zhejiang Oviko Valve Co., Ltd.
 General Mechanical Components > Valves >  CAST TRUNNION BALL VALVE

CAST TRUNNION BALL VALVE

Standard or Nonstandard:
API6D,DIN
Structure:
2/3 Piece Body
Pressure:
Class 150#-2500#
Power:
Lever,Gear,Actuated
Temperature of Media:
-29-200?
Media:
Water,Oil,Gas
CAST TRUNNION BALL VALVE
 
Detailed Description
 


A. Double block and bleed..
B. Lower operation torque.
C. Anti fire safe and static design.
1.Blow-out proof stem
 
For the purpose of preventing the stem from flying off  resulting in abnormal rising of the inner pressure of valve,shoulder is fixed at the lower part of the stem.In addition,in order to prevent leakage resulting from burnout of packing set of the stem in a fire,thrust bearing is set at the contact position of the shoulder at lower part of the stem and valve body.Thus an inverse seal seat is formed which will prevent leakage and avoid accident.
 
2.Key lock
 
Locks can be used to lock the manual valve when  it is fully open or closed so as to prevent non-working personnel from pulling the handle which may result in misoperation of valve.It can also avoid opening or closing of valve resulting from the shock from pipelines or unpredictable factors that may cause an accident.For working pipelines such as combustible and explosive oil,gas and chemical medium,or for field piping site,the locking mechanism is especially useful.
 
3.Anti-fire safe design
 
When the trunnion ball valve be used normally,its sealed by seat and ball surface,seat retainer sealed by O-ring and body,this is soft sealed and reliable sealing.When the seat and O-ring are burnt,the seat retainer and body will be sealed by expanded graphite.Thus act anti-fire safe purpose.
 
4.Anti-static device
 
In order to prevent friction among ball,stem and PTFE that generates static electricity which may light the combustibles and explosives that cause an accident,in this ball valve,static-conduction spring is set between the stem and the ball,the stem and the body.Thus static electricity is conducted to ground and system safety is secured.
 
5.Free leakage of body Sealed construction
 
The connective position of valve body and bonnet is double sealed by gasket and O-ring,on this base,such factors as fire,high temperature,shock and uneven opening or closing of the torque all can??t induce external leakage.
 
6. Double block&bleed(DBB)
 
When ball is full open or close position,the transmitter substance in center cavity of body can be released by drainage and emptying devices.In addition,the over loaded pressure in the center cavity of valve can be  released to low pressure end by self relief seat.
 
7.Emergency sealing
 
Compound injection holes are designed and compound injection valves are installed at locations of stem/cap and body support of side valve.When sealing of stem or seat is damaged to induce leakage,the compound can be used to do the second time sealing.A concealed check valve is installed in side of each compound injection valve to prevent compound from out flowing due to the action of transmitter substance.The top of the compound injection valve is the connector for fast connection with compound injection gun.
 
8.Automatic body cavity relief
 
When the body pressure going up un-normally as the unstable factor,the trunnion ball valve downstream seat will be pushed by unnormal pressure,and the release the un-normally pressure automatically,it doesn't damage to the sealing of upstream seat.
 
9.Various driving types
 
The top pad of valve designed according to ISO 5211,which is convenient for connection and exchange of various drivers.The common driving types are manual,electrical,pneumatic and pneumatic/hydraulic.

we are an exporter including trunnion ball valve.we can send good service for all of our customers all the world!We are specializing in producing many kinds of products,welcome to contact me for the details!We not only promise the good quality but also stable quality . Customer no need usually change suppliers again!Above items are just a part, many more Cisco products are not listed out, please feel free contact us for more details. Thank you for your attention


Company information:
    Zhejiang Oviko Valve Co., Ltd. Was established in 2004 . We is an exporter of China (Mainland) Valves products.    Our products are mainly sold to North America South America Eastern Europe Southeast Asia Africa Mid East Eastern Asia Western Europe! We have a perfect quality management system to ensure the quality of our products.    We are glad to invite you to be our value partner!Please visit our website at www.ovikovalve.com for details about our company!
Hot Searches: 24k Pure Gold Foil ,Hot Stamping Foil Textil ,Black Hot Stamp Printing Foil ,Pvc Leather Stamping Foil ,Pigment Hot Stamping Foils
 
Send Inquiry to this Supplier
 
Zhejiang Oviko Valve Co., Ltd.
Mr. STONE XU
HEYI VILLAGE,OUBEI TOWN,YONGJIA COUNTRY,ZHEJIANG PROVINCE,CHINA
86-577-57760000
 

Hot Products from Other Importer & Supplier

 

Copyright © 2010 Wholesale lots. All rights reserved. Contact Us:tonyluo2005@gmail.com

Processed in 0.12069 second(s)