Zhejiang Oviko Valve Co., Ltd.
 General Mechanical Components > Valves >  TOP ENTRY BALL VALVE

TOP ENTRY BALL VALVE

Standard or Nonstandard:
API6D,DIN
Structure:
One Piece Body
Pressure:
Class150# -2500#
Power:
Handwheel,Actuated
Temperature of Media:
-196-450?
Media:
Water,Oil,Gas
TOP ENTRY BALL VALVE
 
Detailed Description
 


A. One piece body with reliable sealing.
B. Lower operation torque.
C. Double block and bleed.
One piece body
 
One piece body is used for the body to guarantee sufficient strength and rigidity under maximum rated operating pressure.The internal parts of valve are carefully designed and selected to ensure reliability under all kinds of operating condition.Enough margin wall thckness and adaptation of high strength connective bolts are convenient for valve maitenance and sufficiency to support the stress from piping.
 
Top entry
 
Its most difference from common ball valve is that its maintenance can be made on pipe line and without dismounting from the pipe line.The back space seat structure is adopted for the seat and the rear portion of seat retainer is oblique angle to prevent accumulation of impurity from affecting back space of seat.
 
Low operation torque
 
OVIKO top entry series ball valve has a trunnion mounted ball,whose surface is ground,polished and hard face treated.The ball and stem is integrated,sliding bearing is installed on the external bore so that the friction radius is small and operation torque is very low.
 
Emergency sealing
Compound injection holes are designed and compound injection valves are installed at locations of stem/cap and body support of side valve.When sealing of stem or seat is damaged to induce leakage,the compound can be used to do the second time sealing.A concealed check valve is installed in side of each compound injection valve to prevent compound from out flowing due to the action of transmitter substance.The top of the compound injection valve is the connector for fast connection with compound injection gun.
 
Reliable sealing
 
The seat sealing is formed by seat sealing and metal retainer component.The seat retainer floats axially and low pressure sealing of valve seat is reached by pre-pressure of spring.In addition,the piston effect of valve seat is designed reasonably,which realized high pressure sealing by the pressure of operating medium and realize the interception of retainer to form the sealing of the body.The expansion graphite ring is designed to realize sealing under fire condition.
 
Double block&bleed(DBB)
 
When ball is full open or close position,the transmitter substance in center cavity of body can be released by drainage and emptying devices.In addition,the over loaded pressure in the center cavity of valve can be  released to low pressure end by self relief seat.
 
Anti-static and fire safe design
 
The fire prevention design of valve meets the requirement in API6FA/API607 standard and the design of the anti-static conforms to regulations in API6D and BS5351.
 
 
Extension stem
 
For the underground installed valve,the stem can be lengthened and for the convenience of operation the corresponding compound injection nozzle and drainage valve can be extended to the top of valve.
 
Various driving types
 
The top pad of valve designed according to ISO 5211,which is convenient for connection and exchange of various drivers.The common driving types are manual,electrical,pneumatic and pneumatic/hydraulic.

We supply with all kinds of top entry ball valve!We also accept special order about the products. If you are interested in our products. Please do not hesitate to let us know.We are pleased to give you the detailed information.We promise that all our products are made of top quality materials.We are sincerely looking for your cooperation.


Company information:
    Zhejiang Oviko Valve Co., Ltd. Was established in 2004 . We is an exporter of China (Mainland) Valves products.    Our products are mainly sold to North America South America Eastern Europe Southeast Asia Africa Mid East Eastern Asia Western Europe! We have a perfect quality management system to ensure the quality of our products.    We are glad to invite you to be our value partner!Please visit our website at www.ovikovalve.com for details about our company!
Hot Searches: Colorful Tattoo Tubes ,Blood Disposable Tubes ,Black Box Tattoo Tubes ,Aluminium Tattoo Grip ,Sterilized Disposable Tubes And Needles
 
Send Inquiry to this Supplier
 
Zhejiang Oviko Valve Co., Ltd.
Mr. STONE XU
HEYI VILLAGE,OUBEI TOWN,YONGJIA COUNTRY,ZHEJIANG PROVINCE,CHINA
86-577-57760000

Copyright © 2010 Wholesale lots. All rights reserved. Contact Us:tonyluo2005@gmail.com

Processed in 0.12069 second(s)