MARYDA Machinery Co., Ltd.
 Minerals & Metallurgy > Cast & Forged >  block splitter Hydraulic Gear Pump, block splitter hydraulic pump, block splitter Gear Pump

block splitter Hydraulic Gear Pump, block splitter hydraulic pump, block splitter Gear Pump

Place of Origin:
China (Mainland)
Brand Name:
MARYDA
Model Number:
GEAR PUMP
Theory:
Rotary Pump
Structure:
Gear Pump
Usage:
Oil
block splitter Hydraulic Gear Pump, block splitter hydraulic pump, block splitter Gear Pump
 
Detailed Description
 


We produce block splitter Hydraulic Gear Pump, block splitter hydraulic pump, block splitter Gear Pump

HI/LO Hydraulic Gear Pump,HI/LO hydraulic pump,HI/LO Gear Pump

Model MRGP-CBN is a HI/LO Hydraulic Gear Pump with 12 displacement
combinations with maximum pressures of 950 psi for the low pressure
pump and 3000 psi for the high pressure pump. The change from LO to HI
pressure is automatic with the LO side pressure pre set from 400 psi to 900 psi.
The HI/LO section of the pump is all aluminum and or iron covers.

Applications for the HI/LO pump are log splitters, presses etc. where
rapid movement of the cylinder at low pressure is required prior to
automatically switching to the high pressure mode to meet load
requirements.

We produce block splitter Hydraulic Gear Pump, block splitter hydraulic pump, block splitter Gear Pump

ModelFlow (GPM @ 3600RPM)Displ. (Cu.in/rec)Pressure (PSI)Speed (RPM)Port
LOHILOHIInletOutlet
MRGP-CBN-08080.1300.385400/900300036001 IN PIPE1/2 IN PIPE
MRGP-CBN-0858.50.1830.385400/90030003600
MRGP-CBN-09090.2200.385400/90030003600
MRGP-CBN-100100.1300.537400/90030003600
MRGP-CBN-10510.50.1830.537400/90030003600
MRGP-CBN-110110.2200.537400/90030003600
MRGP-CBN-11511.50.2560.537400/90030003600
MRGP-CBN-120120.1300.665400/90030003600
MRGP-CBN-12512.50.1830.665400/90030003600
MRGP-CBN-130130.2200.665400/90030003600
MRGP-CBN-13513.50.2560.665400/90030003600
MRGP-CBN-160160.2560.793400/90030003600

( All those displacement, pressure, rotate speed, flange, ports, and shaft can be customized as your requirements.)

Recommended working conditions:
1. FILTRATION 25 micron or better
2. OIL VISCOSITY 6 to 200 cSt
3. INLET PRESSURE 12 to 32 psi abs.
4. OIL TEMPERATURE -25 to 80 degrees C
(-12 to 175 degrees F).
5. AMBIENT -22 to 55 degrees C

Flow rate=Displacement (cu.in/rev) X speed (rpm)

If you want to know more about them, including the sizes, pls contact us.


We supply with all kinds of Gear Pump!We can also produce according to your requirement.We promise that we will offer you best quality and satisfying after-service.If you have any problems about details please contact us.


Company information:
    MARYDA Machinery Co., Ltd. was established in 2007 . We is an exporter of China (Mainland) Cast & Forged products.    With independent export rights, our products have been exported to North America South America Eastern Europe Southeast Asia Africa Oceania Mid East Eastern Asia Western Europe, etc. All of our products comply with international quality standards and are popular in various markets around the world.    We warmly welcome all friends from all over the world to be our business partners on the basis of equality and benefits to create a good future.Please look at our website at www.maryda.com for detail information of our company activities.
Hot Searches: Chiffon Viscose Fabric ,Spandex Viscose Fabric ,Plain Viscose Fabric ,Plain Polyester Viscose Fabrics ,Men Hua
 
Send Inquiry to this Supplier
 
MARYDA Machinery Co., Ltd.
Mr. Justin Lee
No.33, Lane 99, Zhucheng RD
86-21-51012340

Copyright © 2010 Wholesale lots. All rights reserved. Contact Us:tonyluo2005@gmail.com

Processed in 0.12069 second(s)