Taizhou Huangyan Smart Machinery & Mold Co., Ltd.

PET preform Mould

Brand Name:
Smart
Shaping Mode:
Preform Mould
Product Material:
Plastic
Product:
Household Product
Port::
Ningbo
Packaging Details::
Wooden Case
PET preform Mould
 
Detailed Description
 


PET preform Mould,PET preform mold,preform mould,Preform Injection Mould

 

PET preform Mould,PET preform mold,preform mould,Preform Injection Mould

 

PET Preform Mold Features

1. There are 4 cavities up to 72 cavities on PET preform mold.
2. Electric control system with simulating stretch testing improve yield rate.
3. Adopt world advanced dipole taper localization technique, each cavity self-clamp independently, ensure mold concentricity.
4. The material of mold die core and die cavity are made of Sweden special mold steel.
5. International standard screw neck, imported nitrided steel with high hardness is of long usage.
6. Advanced hot runner design and even heating temperature make sure the high quality of plastic products.
7. Valve gated type without tail reduces labor force.
8. At least 3 million guarantee.
PET Preform Mold Design
We designs not only preform with standard neck size for water preform, carbonated drink preform and oil preform, also design preform of special shape responding to customer’s request. We adopts a wide range of computer-aided engineering service from design conception to the finished products to make customer satisfied.
Valve-gate system

Our preform injection mold adopts an advanced valve-gate unit, which is used to control the mold’s injection hole open & close on each cavity. Reliable sealing function, smoothing moving, low thermal expansion rate, and long using life are its main features.

Patent designed rectifying system for preform’s wall thickness
The patent designed rectifying device is equipped to rectify the preform thickness during preform production. The preform thickness can be adjusted below 0.05mm.
Heating system

PET preform mold with double heating system ensures perfect heating effect. It has separate temperature control mode: the heater bars are used to heat the mold’s manifold plate; the small heaters are used to supply the continuous heating temperature for cavity nozzle.

 

Cooling system

 

A specially designed cooling system with perfect cooling effect for each inner parts including core, cavity and valve gate system of Yichuan preform injection mold.

 

Hot runner system

 

preform injection mold adopts specially designed hot runner system to achieve ideal and prompt heating effect for preform production. Lager flowing channels of such hot runner system ensures the mold to produce preform with lower injection pressure, which reduces mold’s each part’s wear & tear and maintenance cost, and also saves electric energy.

 

Steel material and machining tools

 

Mold cavity and Core are made of imported mold steel with fine polishing, high hardness and anti-corrosion to guarantee mold's high precession and good quality.
Digital Control Lathe, EDM, jig-boring machine and high-precision grinding machine have been used on mold machining. High machining precision and fast machining speed ensure Yichuan’s high quality molds.

 

Heat treatment

 

After mechanical treatment, enhance steel’s strength and prolong mold service life. For example, we coat chrome on the mold plate surface for rustproof purpose and go on nitrogen treatment on neck part to increase its hardness. Special coatings also are available at our Machinery. With right operation, PET preform mold reaches 2.5 million shots.
After-Sales Service
Each set of PET preform mold undergoes strict mold trials before shipping from factory and attaches full set of parameter that is recorded depending on their own and sole serial number. Together with the PET preform mold, full set of spare parts will be supplied for free to keep mold normal working. In the use of the PET preform mold, Yichuan provides adequate spare part to any request and Yichuan service department are very willing to provide technical support immediately for any possible request in any time.

PET Preform Mould Main Components Specification and Advantages

Main component

Specification and Advantages

Core

2316 steel from Sweden

high-quality special mould steel from sweden (HRC >45) gurantee 2 million shots without any maintenance

Neck

S136 steel from Sweden, HRC >60,

International standard screw neck

Cavity

2316 steel from Sweden

Each cavity have an independent temperature controller

Each cavity self-clamp independently, ensure mould concentricity. 0.05-0.06mm

Body

P20 Steel material from Germany

Hot runner plate

 

2344 Steel material from Germany

 

Slider Plate

wear-resistant copper

specially designed cooling circuits

Proper design reduce molding cycle time to 15 seconds( with proper

water chiller and injection machine) about 3-5 shots per minute

Hot runner design

make sure the high quality of preform products.

Heater

Anole Germany

valve gated design with Automatic drop

each cavity has its independent heating zone and temperature is measured by independent thermocouple. .(advantages: easily avoid some problems such as white or draw bench on bottom).

Valve gated type without tail reduces labor force.

Precessed by high presion CNC machine and numerical control loathe machine

Lowest weight and dimensional variation

thickness between max. part and min. part is not more than 0.05mm make sure that every parts can match well


We supply with all kinds of Preform Mold!All the above picture is just for your reference, We can provide service according to client's requirements!Our toner cartridges are high quality with low price. We promise to supply our customers best service.If you have any problems about details please contact us.


Company information:
    Taizhou Huangyan Smart Machinery & Mold Co., Ltd. established on 2010 in Japan. We is an exporter of China (Mainland) Plastic Blowing Machinery products.    Our products always sell well in the worldwide markets, including North America South America Southeast Asia Africa Oceania Mid East Eastern Asia Western Europe. We consider quality as the most important and our clients as our god.    We sincerely invite you to contact us!For more information visit our website at www.jqm.com.cn!
Hot Searches: Electric Distribution Companies ,Soft Drinks Distributer ,Gift Card Distribution ,Food Service Distribution ,Power Quality Distribution
 
Send Inquiry to this Supplier
 
Taizhou Huangyan Smart Machinery & Mold Co., Ltd.
Ms. Millie Mao
Rm.302,Building B4,City Harbor,Hongjia,Jiaojiang
86-576-88031336
8613516863372

Copyright © 2010 Wholesale lots. All rights reserved. Contact Us:tonyluo2005@gmail.com

Processed in 0.12069 second(s)