Shanghai Zhongke Education Equipment Group Co., Ltd.
 Chemicals > Lab Supplies >  education laboratory

education laboratory

Laboratory Furniture
General Use:
Commercial Furniture
Metal Type:
Stainless Steel
Brand Name:
education laboratory
Detailed Description

education laboratory
17 years experience
acid alkali resistant
scratch&impact high temperature
ISO9001:2008 ISO14001:2004

education laboratory


Our advantages


1. Decades of making experience

2. Advanced making equipments

3. Foreign advanced technique

4. Many world-class company' supplier


 ISO9001:2008; ISO14001:2004


Steel fume cupboard features:


 high quality painted steel

Working surface

Laboratory specialized 12.7mm C-SPC from  American Wilsonart

base cabinet

  Cold-rolled steel, packetized by acid, coated by epoxy resin.


 One door ,one drawer

Inner liner ,air baffler                   

5mm (1/5")compact grade laminate, high thermo stability, corrosion-resistant

vertical rising sash

5mm (1/5")explosion-proof FRP(Fiberglass reinforced plastics ),height adjustment700mm(7/3′),inner chamber:1200mm(4′),table top is 800(8/3′)mm, scientific size and  design

Fume hood Lighting

Light illuminance:140LUX ,30wDaylight lamp in anti-corrosion cover

blower(not included)

Axial fan, 2100m3/h,0.25kw.220v,50HZ

exhaust pipe(not included)

¢250/300mm(10"/12") pipe

PP sink

anti-acid, corrosion-resistant, anti-solvent, thermostability

Chemistry faucet

  copper, sprayed by epoxy resin, ceramic valve, imported pp handle                  

Technique index

Noise:60DB,air rate:0.5m3/s

According to OSHA(Occupational Safety and Health Administration)- AppendixA,sectionC.4(g), The airflow rate is 0.3-0.5m/s

Fume hood sizes

1200*800*2350mm-4 ′length

1500*800*2350mm-5  ′length

1800*800*2350mm-6  ′length


Sizes of Fume hoods:





Worktop: 20mm ceramic slab, 20mm Epoxy, 1.2 GB SS316L stainless steel, 19mm solid physicochemical boards.



Specification introduction:

1, Cabinets structure: the upper exhaust cabinets and the lower storage cabinets are the two parts of the cabinets.

2, Cabinets material: The surface of 1.0mm thick 1st electrolytic Japan/Shanghai BAOTEEL cold-rolled steel is picked, phosphated, sprayed by EPOXY uniform electrostatic power so that it has good corrosion resistance.

3, Sash door: The sash of 6mm thick tempered glass has ear-balance system and could be in any position.

4, Preset baffles: The preset baffles are designed and simulated to ensure uniform face velocity and efficient fume ventilation without dead spots. In the standard conditions, three-ventilation could ensure that the different gas exhausted in the upper, middle and lower preset baffles.

5, Exhaust collar: the exhaust collar with cone-shaped gas-collecting point of view and slip angle can be a good collecting average and low pressure loss. Accords to the fume hood size, there may be one or two collars of either 200mm or 315mm diameter.

6, Side column: the design of radial preset baffles makes the fluid flow into the cavity of the fume hood successfully, reducing the possibility of turbulence.

7, the operation panel: thin-film electronic circuit microcomputer control panel mark power, lighting, motors, standby (switch) and the LED running lights.

8, the lighting system: hidden fluorescent, the table is above 400 lax illuminations.

9, the worktop: the disk structure of ceramic plate/epoxy board/Trespa Toplab ensure liquid containment, worktop covers the whole lower cabinet plane in order to prevent syrup leaking from the danger. All fume hood worktops provide cutouts as required for gathering waste water.

Various materials are available to meet your specific needs.


We promise to supply you with high quality Laboratory Bench!We also accept special order about the products. If you are interested in our products. Please do not hesitate to let us know.We are pleased to give you the detailed information.We promise: provide you the most reasonable prices,high quality and the best services.We are sincerely looking for your cooperation.

Company information:
    Shanghai Zhongke Education Equipment Group Co., Ltd. established sine 2003 . We is an exporter of China (Mainland) Other Lab Supplies products.    We have exported products to many other countries, such as North America South America Eastern Europe Southeast Asia Africa Oceania Mid East Eastern Asia Western Europe Northern Europe Southern Europe. We have implemented a strict and complete quality control system, which ensures that each product can meet quality requirements of customers!    We sincerely invite you to contact us!Please visit our website at for detailed information on our organization.
Hot Searches: Soft Gel Moulds ,For Ipad Housing ,Phone Provider ,Flash Drive Sms ,Bandlux
Send Inquiry to this Supplier
Shanghai Zhongke Education Equipment Group Co., Ltd.
Mr. William Fu
No.101 South Wangdong Road, Sijing Town, Songjiang District, Shanghai, China

Copyright © 2010 Wholesale lots. All rights reserved. Contact

Processed in 0.12069 second(s)