Tsingtao Unicom-Optics Instruments Co., Ltd.
 Chemicals > Lab Supplies >  DZS-708 Multi-parameter Water Analyzer

DZS-708 Multi-parameter Water Analyzer

Model Number:
DZS-708
DZS-708 Multi-parameter Water Analyzer
 
Detailed Description
 


DZS-708 Multi-parameter Water Analyzer

DZS-708 Multi-parameter Water Analyzer

DZS-708 multi-parameter analyzer (hereafter refers to meter) is a new laboratory analyze meter which contains ion measuring, conductive measuring, DO measuring and temperature measuring. It allows to inspecting the relevant parameter of above. It also allows users to select individual measuring according the practical needs. In which ion measuring allows to measure: potential value, pH value (or pX value), ion concentration. Conductive measuring can measure: conductivity, resistivity, TDS, salinity. DO measuring can measure: electrode current, concentration & saturation of DO.

 

Characteristics:

1.Ion Measuring:

1.1. Can measure potential value, pH value (or pX value), concentration of ion.

1.2. Can measure several normal ions. Meter provides several normal ion models: H+, Ag+, Na+, K+, NH4+, Cl-, F-, NO3-, BF4-, CN-, Cu2+, Pb2+, Ca2+, etc. for easy use. User can match relevant ion selective electrode and reference electrode to measure corresponding ion concentration directly. When measuring finished, user can easily arrange the switching between different concentration units.

1.3. Apart from the ion unit provided by the meter, in case user needs to measure other ion, you can also set your own ion model to measure other ion.

1.4. Meter has the ability of automatic distinguishing standard buffer solution. You can select several pH standard buffer solutions to calibrate electrode. Total 10 different standard solutions are provided.

1.5. User can set own standard solution groups.

1.6. With one-point calibration, two-points calibration and multiple point calibration (mostly 5 points) function.

1.7. With several concentration measuring modes: direct read concentration measuring mode, known adding measuring mode, unknown adding measuring mode and GRAN measuring mode.

1.8. On the basis of single slice micro-processor, with high precision A/D switching chip, matched with precise measuring electrode, meter can ensure the high precision. The valid resolving power of potential can be reached to 0.01mV.

2. Conductive Measuring:

2.1. Meter can measure conductivity, resistivity, total solid solution (TDS) and salinity.

2.2. Within full measuring range, meter has automatic temp. compensation, automatic calibration, automatic measuring range, automatically frequency switching functions.

2.3. With calibration function, user could calibrate electrode constant or TDS switching coefficient. 

3. Dissolved Oxygen Measuring:

3.1. Meter can measure dissolved oxygen’s concentration, saturation and electrode current.

3.2. With automatic temperature compensation function.

3.3. With calibration function which can make zero oxygen calibration, full scale calibration, atmosphere calibration and salinity calibration.

4. Other Characteristic:

4.1. Big 5.7?? touch screen for easy use.

4.2. Apart from ion concentration, meter allows to measure all parameter in ion , conductive , DO and temperature simultaneously. Of cause, it also allow user to select necessary parameter for measuring.

4.3. Meter supports GLP regulation:

a. Meter requests user to set operator number and then can record down the procedure of all user.

b. Can record down and print calibrating data

c. Can store 200 sets measuring data in each of pH measuring data, conductive measuring data, TDS measuring data, salinity measuring data and dissolved oxygen measuring data if all are meets GLP regulation. Meter can also store 6 kinds of ion measuring value including corresponding pX value and ion concentration value 100 sets of each. 

4.4. Can Search, print and delete measuring data

4.5. Can search the using parameter under present measuring mode as well as previous calibration data.

4.6. There are three measuring modes: continuous measuring mode, time measuring mode and balance measuring mode to meet different user’s measuring requirements.

4.7. With standard RS232 interface, can connect with PC.

4.8. With electricity cut off protection function which can protect the stored measuring data, calibrating data and set parameter to be saved when meter is turned off or abnormal electricity cut off occurred.

 

Specifications:

  1. 1.      Measuring Range:

a. mV: (-1999.99 ~ 0)mV, (0 ~ 1999.99)mV;   

b. pH/pX: (-2.000 ~ 19.999) pH/pX;

c. Concentration: various concentration value in correspondence to potential measuring range and indicating electrode.

d. Conductivity: 0.000μS/cm ~ 199.9mS/cm    

e. Resistivity: 5.00Ω.cm ~ 20MΩ.cm

f. TDS: 0.000mg/L ~ 19.99g/L               

g. Salinity: (0.0 ~ 8.00)%

h. Dissolved oxygen concentration: (0.00 ~ 19.99)mg/L

i. Dissolved oxygen saturation: (0.0 ~ 199.9)%   

j. Temperature: (-5.0 ~ 135.0) °C

2. Resolving :

a. pH/pX: 0.01/0.001pH              

b. mV: 0.1/0.01mV                  

c. Dissolved Oxygen: 0.01mg/L

d. Saturation: 0.1%

e. Temperature: 0.1°C

3. Electronic Unit Accuracy:

a. pH/pX: ± 0.002pX ± 1 bit   

b. mV: ± 0.03% (FS)

c. Ion concentration:  ± 0.5% ± 1 bit 

d. Conductivity: ± 0.5% (FS) ± 1 bit

e. TDS: ± 0.5% (FS) ± 1 bit

f. Salinity: ± 0.1% ± 1 bit

g. DO: ± 0.10mg/L

h. DO saturation: ± 1.0%

i. Temperature: ± 0.3°C± 1 bit

4. Input Impedance: >3x1012Ω

5. Normal working condition:

a. Ambient temperature : (5.0 ~ 35.0)°C

b. Relative humidity : ≤ 85%

c. Power supply: DC(9VDC, 800mA)

d. No performance-affected vibrations nearby.

e. No corrosive gases in surrounding

f. No strong electromagnetic interference except the geomagnetic fie

6. Outside Dimension: 290 x 200 x 70mm

7. Weight:1Kg


We supply with all kinds of Electrochemical Instrument!All the above picture is just for your reference, We can provide service according to client's requirements!We not only promise the good quality but also stable quality . Customer no need usually change suppliers again!If you have any problems about details please contact us.


Company information:
    Tsingtao Unicom-Optics Instruments Co., Ltd. established sine 2007 . We is an exporter of China (Mainland) Other Lab Supplies products.    Our products are mainly sold to North America South America Eastern Europe Southeast Asia Africa Oceania Mid East Eastern Asia Western Europe! Yangjiang Q Mark Cutlery Factory has won a high reputation among clients. Our products are popular with clients due to the highest quality. We make the products in accordance with ergonomic requirements.    We invite you to visit our website and deliver your inquiries to us!We look forward to serving you!we are very excited to invite you visiting our website at www.unicomoptics.com for initial study!
Hot Searches: Plasma Tv Dvd ,Car Av Interface ,Dvd Monitoring ,Camry Remote ,Hot C4
 
Send Inquiry to this Supplier
 
Tsingtao Unicom-Optics Instruments Co., Ltd.
Mr. Domty Unicom
Building 2, Huanghai West Road
86-532-88480588

Copyright © 2010 Wholesale lots. All rights reserved. Contact Us:tonyluo2005@gmail.com

Processed in 0.12069 second(s)