Suzhou Saipu Air Separation Technology Co., Ltd.
 Electrical Equipment & Supplies > Generators >  Nitrogen Purifier

Nitrogen Purifier

Brand Name:
Saipu
Model Number:
103
Usage:
Nitrogen
Nitrogen Purifier
 
Detailed Description
 


3 methods;
SNC-1 nitrogen purifier;
SNC-2 nitrogen purifier:
SNC-3 nitrogen purifier;
SNC-4 nitrogen purifier

Features:

SNC-1 nitrogen purifier:
1) Process: catalytic conversion using hydrogen for de-oxidization
2) Technical parameters:
a) Outlet nitrogen purity: ≥99.999%
b) Oxygen content: ≤5ppm
c) Dew point: ≤-60°C
d) Hydrogen content: ≤0.5%

By using high quality catalysts that do not require any additional activation, our deoxidization process is highly efficient. Our SNC-1 is suitable for industrial applications that require high-purity nitrogen, but at the same time, be able to tolerate higher levels of hydrogen gas residual content.

SNC-2 nitrogen purifier:
1) Process: catalytic conversion using hydrogen for de-oxidization,
followed by removal of hydrogen
2) Technical parameters:
a) Outlet nitrogen purity: ≥99.999%
b) Oxygen content: ≤2ppm
c) Dew point: ≤-60°C
d) Hydrogen content: ≤5ppm

Similarly, this process uses high quality catalysts and hydrogen gas to produce high purity nitrogen, and followed by the removal of residual hydrogen gas. As a result, SNC-2 is suitable for processes that can only accept minimal residual contents of oxygen and hydrogen gases.

SNC-3 nitrogen purifier:
1) Process: oxygen removal through chemical reaction, using
de-oxidants
2) Technical parameters:
a) Outlet nitrogen purity: ≥99.999%
b) Oxygen content: ≤1ppm
c) Dew point: ≤-60°C
d) Hydrogen content: ≤5ppm

When the oxygen content of the supplied nitrogen is less than 1,000ppm, we recommend our SNC-3 that uses high efficiency de-oxidants to remove oxygen. With this process, high purity nitrogen can be produced without any residual hydrogen gas content. However, this process requires the de-oxidization device to be periodically regenerated using hydrogen gas and heat.

SNC-4 nitrogen purifier (oxygen removal with carbon):
1) Process: oxygen removal using activated carbon
2) Technical parameters:
a) Outlet nitrogen purity: ≥99.999%
b) Oxygen content: ≤5ppm
c) Dew point: ≤- 60°C
d) Hydrogen content: ≤5ppm

When the oxygen content of the supplied nitrogen is less than 5,000ppm, we recommend using our SNC-4 that uses high efficiency activated carbon de-oxidants to remove oxygen traces. Thus, high purity without hydrogen is obtained. However, this process also requires the periodical replenishment of the used activated carbon.


We promise to supply you with high quality Purifiers!All the above picture is just for your reference, We can provide service according to client's requirements!We promise the high quality but the low price . Welcome to discuss the business.If you have any problems about details please contact us.


Company information:
    Suzhou Saipu Air Separation Technology Co., Ltd. was established in 2002 . We is an exporter of China (Mainland) Gas Turbine Generators products.    With independent export rights, our products have been exported to North America South America Eastern Europe Southeast Asia Africa Oceania Mid East Eastern Asia Western Europe, etc. Our company insists on strict quality standards.    If you are interested in our products, please do not hesitate to contact us. You are welcome to our firm!Please look at our website at www.saipu.com.cn for detail information of our company activities.
Hot Searches: Soft Closing Toilet ,Small Bathroom Toilets ,Anti Piece ,Bathroom American Standard ,Small Bathroom Toilet
 
Send Inquiry to this Supplier
 
Suzhou Saipu Air Separation Technology Co., Ltd.
Ms. Grace Liu
A-710 Shuangzi Building , NO588 Binhe Road, Suzhou ,China
86-0512-66389685
18913589855

Copyright © 2010 Wholesale lots. All rights reserved. Contact Us:tonyluo2005@gmail.com

Processed in 0.12069 second(s)