Jiangsu Dickson Lighting Equipment Co., Ltd.
 Agriculture > Fresh Cut Flowers >  (LD-001LD-002LD-003) Street lamps/outdoor lamp/street lighting

(LD-001LD-002LD-003) Street lamps/outdoor lamp/street lighting

Brand Name:
Yang Di
Model Number:
Charging Time (h):
Solar Cell Type:
Stainless steel
(LD-001LD-002LD-003) Street lamps/outdoor lamp/street lighting
Detailed Description

we are the company specialized in processing solar lights,High mast pole light,Garden lamp,Landscape,Outdoor lighting,led light


One  The pole


1  pole material selection Shanghai Baosteel produced high quality low carbon steel Q235A type, steel, silicon content is not higher than 0.04%, after a large press brake bending shape, straightness error is less than 0.05%, the poles of the wind resistance by 36.9 m / s for more than 11 design, anti-seismic intensity for the eight

2  Rod always high X m, the diameter of Xmm, under caliber Xmm, wall thickness Xmm. Pole with the bottom flange, flange installation pitch as ?X, through the anchor bolts installed in the foundatio(X for the user to set the parameters, or by the company on the basis of conventional configuration)

3   Pole automatic submerged arc welding way, welding reliable, smooth surface, no obvious holes, welding tumor, welding defects such as undercut, ultrasonic flaw detection test, up welding GBl1345 grade standards

4   Steel rods with corrosion protection inside and outside the hot-dip galvanizing, galvanized process through pickling, galvanizing, washing, phosphating, passivation processes, zinc coating surface is smooth and beautiful, shiny and there was not wrinkled skin, fluid fall and zinc tumor, from the skin, spots, surface defects such as yin and yang, the existence of zinc coating thickness of 86um above the national standard GB/T13912-92, zinc coating adhesion meet the requirements of GB2694-88, anti-corrosion life of more than 30 years

5 Pole electrostatic spray after hot-dip galvanizing (color optional), spray before grinding to increase the adhesion, spray the strict control of the process of curing time and temperature, plastic layer to ensure uniform, smooth, without pores. Spray layer thickness ≥ 1Ooum, adhesion to GB9286-880 level, smooth surface, hardness ≥ 2H


Two Lighting


Light body, light cover aluminum die-casting, the surface electrostatic spray, light and corrosion-resistant structure. The shell is anti-corrosion second grade ; protection grade IP65; electric shock level of first class ,meet the "lighting safety requirements and test" (GB7000.1-7000.6) requirements
High purity aluminum reflector is extruded through anodizing electrochemical polishing treatment, with the optical properties of stable, high reflectivity characteristics
Surface through the mask with high-strength glass, high temperature above 200 °C, high transmittance, high impact
Reflector, tempered glass cover and lamp holder with sealing adhesive into one to form the inner bulb replacement, with good sealing performance, high temperature above 250 °C ring, sealed up to IP66


Three Electric


250W high pressure sodium lamp with Shanghai Philips, with Philips ballast, trigger, capacitors, Philips energy-saving lamps (Or the user to choose other brands)


Four  Other technical parameters


Pole height                                   ±5%
High beam boom                          ±1%
Rated voltage                               220V
Rated insulation voltage              500V
Rated frequency                           5OHz
Insulation resistance                    ≥5OOMQ
Dielectric Strength           Can withstand the exchange 5Ohz, 15OV (effective mass), experimental voltage last one min no breakdown or flashover phenomenon.
Power Factor                                                                      cns≥0.85
Protection against electric shock type of lighting               first  class
10.  Wiring                                                                         Single-phase

11.  Luminaire efficiency                                                     ≥75%

12.  Protection class                                                           IP65

13.  Reflector material                                                        3002-0 Sheet Metal

14.  Lampshade material                  High transparent tempered glass

15.  Candela distribution                  Wing of the distribution curve

16.  All electric lamps (ballast, trigger, capacitors) are installed in the lamp within


Five test


Pole test : Quality management manual, test, test specifications and the corresponding national standard and process technology file
Lighting test: GB3037-91 and the corresponding national standard and process technology file

Six  package


Street light pole with a woven belt package, lighting package with box


All this kind Lighting, we promise will offer the best price by the good quality in china!We also accept special order about the products. If you are interested in our products. Please do not hesitate to let us know.We are pleased to give you the detailed information.We promise timely delivery, short lead time and good after sell service.We are sincerely looking for your cooperation.

Company information:
    Jiangsu Dickson Lighting Equipment Co., Ltd. ,established in 1994 . We is an exporter of China (Mainland) Other Fresh Cut Flowers products.    Our main business goal is to provide top quality products for our customers    If you are interested in our products ,for more details, please feel free to contact us.All detail for concern the company are illustred in our website www.jsdszm.cn!
Hot Searches: Million Lcd Projectors ,Compatible Theater Projector ,Digital Touch Video Projector ,Picaso ,Ansi Projectors
Send Inquiry to this Supplier
Jiangsu Dickson Lighting Equipment Co., Ltd.
Ms. Hua Zhou
Gaoyou City, Jiangsu Province, Guoji Town Industrial Concentration Area

Copyright © 2010 Wholesale lots. All rights reserved. Contact Us:tonyluo2005@gmail.com

Processed in 0.12069 second(s)