Shenzhen Bongch Technology Co., Ltd.
 Automobiles & Motorcycles > Vehicle Equipment >  CNC-602A injector cleaner-Uniformity/Sprayability test

CNC-602A injector cleaner-Uniformity/Sprayability test

Voltage:
AC220V±10%
Power:
250W
Certification:
CE
Brand Name:
Launch
Model Number:
CNC-602A
Input power:
250W
CNC-602A injector cleaner-Uniformity/Sprayability test
 
Detailed Description
 


CNC-602A injector cleaner & tester- clean and test injectors by simulating engine working conditions.
Model No.:CNC-602A

CNC-602A injector cleaner & tester

CNC-602A is an advanced electromechanical product, which can clean and test injectors by simulating engine working conditions. It can also perform cleaning on the injectors and fuel supply system on vehicle.

 

Feature

* Ultrasonic cleaning: To perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely.

* Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the help of backlight. This test is also for reverse flush.

* Leakage test: To test the sealing and dribbling conditions of injectors under system pressure.

* Injecting flow test: To check the injecting amount of the injector in 15 seconds of constant injection.

* Auto. test: To test injectors by simulating different working conditions.

* On-vehicle cleaning: The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle.

 

Specification

* Power supply: AC220V±10%, 50/60Hz;AC110V±10%, 50/60Hz.

* Input power: 250W;

* Ultrasonic cleaner power: 100W

* Simulated RPM range: 10~9990rpm; step: 10rpm;

* Time range: 1~9999s;

* Pulse width: 0.5~25ms; step 0.1 ms;

* Fuel tank capacity: 4700ml;

* Dimensions: 695mm x 495mm x 600mm;

* Weight: About 41kg

 

 

Function Improvement

 

Item

Notes on Improvement

Update Date

 The Change about test liquid package on CNC

 We divide the 4 liter test liquid into 4 bottles; the total amount is the same to the last one. We reduce the package of the test liquid to avoid the leak.

 2010-8-2

 Issued new edition user manual for CNC series

 Consolidate the user manual of CNC series(CNC602A/801A/601A) together

 2007-11-22

 Issued software AT89S52 for CNC-602A(with membrane key)

 Optimize software which required by upgrading CNC series

 2007-11-14

 Remove overflow valve and related structure

 Maximum pressure and release are controlled by adjusting the overflow valve.Now no need for adjusting the overflow valve and the operation is simplified.

 2007-9-24

 Separate the backlight cover and the cabinet by fixing the light to the holder

 Fixed backlight is changed to the fixing of holder. Light cover and cabinet are separated and fastened with screws. This gives convenience to service.

 2007-9-24

 Touch keys on control panel turned to membrane keys

 The membrane keys can be more reliable, easy to replace and not prone to get damaged.

 2007-9-24

 Fast resetting of oil pressure to default value

 Fast resetting can be done by pressing function key and run key..

 2007-9-24

 Integration of power socket and fuse

 Easy to install the integrated power socket and fuse.

 2007-9-24

 Replace two switches for power and backlight with one switch

 Power and backlight are controlled by two switches before,now controll by only one switch.

 2007-9-24

 Change separate cable connection to cluster cable connection

 Connection with single cable makes the installation troublesome before,now easy to install after the change.

 2007-9-24

 Change the refilling mouth from square mouth to funnel

 Funnel for refilling can be opened for refilling so that overflow is impossible.

 2007-9-24

 Surface treatment for cross crew stainless screw is cancelled.

 Cross crew stainless screw,GB818-85,M4*12(with white zine)(code:103010124).Its ERP name is changed to cross crew stainless screw,GB818-85,M4*12 (code:103010124)

 2006-12-15

 Update for company address and telephone on the carton of CNC Series

 For the company address and telephone are changed.

 2006-12-15

 The pressure display of CNC-602A is changed to the pressure gauge indicating.

 The pressure sensor and LED level display function are cancelled (oil floater is cancelled accordingly). The fuel level is controlled by level switch and the pressure is indicated by pressure gauge.

 2006-12-15

 Changing the length of installation screw for fuel pump included in CNC-602A cabinet assemby.

 The original screw was short,which makes the installation of fuel pump is difficult.Now the longer screw is used.

 2006-12-15

 Updating the process way for screw of CNC-602A.

 The inner screw used in the cabinet, fuel tank, left side panel and right side panel under the CNC-602A cabniet assemby is inner curling screw, now is changed to nut.

 2006-12-15

 Updating the hole position and size of the nameplate of CNC Series

 Change description: 1.Aluminium nameplate of CNC-602A (10320088): the size of original hole is 4-φ3,which is changed to 4-φ4. 2.the back panel of CNC-602A (X103200214): its installation size is changed to 112X57.

 2006-12-15

 

 

 

 

 

 

 

 

 

 

 

 

 

 


We have important business in the overseas market due to our high quality and reasonable prices. Also,we can supply Launch series products according to customers’ requirements!Of course , if you have some good ideas that you want us to develop or reproduced, please feel free to send us your product image or design artwork, we are also pleased to become your Original Equipment Manufacture.We promise the high quality but the low price . Welcome to discuss the business.We are sincerely looking for your cooperation!


Company information:
    Shenzhen Bongch Technology Co., Ltd. ,established in 2009 . We is an exporter of China (Mainland) Other Vehicle Equipment products.    Our products are mainly sold to North America South America Eastern Europe Southeast Asia Africa Oceania Mid East Eastern Asia Western Europe! Highest quality and best price is the first to offer for our customers!    We will try our best to serve you and hope to become one of your friends and business partners in China.Kindly visit our website at bongch.com for more information!
Hot Searches: Simple Line Drawings ,Plate-straightening Machine ,Air Leveler ,Shoe Flattening Machine ,Soccer Table Leveler
 
Send Inquiry to this Supplier
 
Shenzhen Bongch Technology Co., Ltd.
Ms. Athena White
No.268 Industrial area of Nanyou,Nanshan district,Shenzhen,Guangdong, China
86-0755-26052547,26052567,1-888-5580036
18923461705

Copyright © 2010 Wholesale lots. All rights reserved. Contact Us:tonyluo2005@gmail.com

Processed in 0.12069 second(s)