Dalian No. 6 Acid Proof Pump Factory
 Automobiles & Motorcycles > Vehicle Tools >  LPP- Horizontal Chemical Mixed Flow Centrifugal Pump

LPP- Horizontal Chemical Mixed Flow Centrifugal Pump

Brand Name:
Model Number:
Centrifugal Pump
Single-stage Pump
LPP- Horizontal Chemical Mixed Flow Centrifugal Pump
Detailed Description

LPP- Horizontal Chemical Mixed Flow Centrifugal Pump
1.capacities up to 7000m3/h
2.heads up to 25m
3.pressure 0.6Mpa


LPP- Horizontal Chemical Mixed Flow Centrifugal Pump
1.capacities  up to 7000m3/h
2.heads    up to 25m
3.pressure   0.6Mpa

4.temperature  -20~+120°C

LPP- Horizontal Chemical Mixed Flow Centrifugal Pump




Cast iron, bronzes, nodular iron,

Cast steel, chrome steel,

Stainless steel.

Special materials are possible please enquire.








Variety of layouts

Horizontal-pump and driver separate or on a common base plate. Vertical-pump with motor directly mounted or on a separate floor

Flexibility to meet site requirements.

Large branches

Low flow velocities and high forces and moments accommodated.

Better efficiency, low noise levels and operating costs, minimal pipe anchors.


Wide choice of hydraulics

Double entry impeller

Double Volute Casing

(according to Head)

Optimum solution for nearly every duty requirement at high efficiency.

Good NPSH performance, rotor principally in hydraulic balance.

Reduced radial thrust and bearing loads.

Low operating costs.

High operational security and reliability.

Low thrust loads, low noise and vibration levels over a wide operating range.

Increased shaft and bearing life.

Stiff shaft

Critical speed is higher than running speed, reduced shaft deflection at seals.

Long seal life, variable speed operation possible without resonant vibations.

Choice of bearings and lube systems

Bearings can be selected according to application needs to ensure optimum performance and life.

Lowest capital cost consistent with application.

Choice of materials

Adequate solutions to most erosion/corrosion problems.

Lowest capital cost consistent with satisfactory pump life.


Ordering instruction


* Pump size, pump material, shaft sealing as well as river should be determined according to service conditions. And capacity, total head, suction pressure, NPSH, specific gravity and temperature of medium must be specified when ordering. Also saturated steam pressure in working temperature, inflammability, explosive, toxicity and crystallizability must be given.

* When special requirement for motor, the customer should tell the site condition, environmental temperature and humidity as well as voltage, frequency, installation and explosive proof grade.

* For the type, size and material of shaft sealing, the manufacturer will determine according to operating condition, the customers can also specify in their orderings.

We supply with all kinds of LPP chemical industry pump!We can also produce according to your requirement.We promise that we will offer you best quality and satisfying after-service.If you have any problems about details please contact us.

Company information:
    Dalian No. 6 Acid Proof Pump Factory was established in 1992 . We is an exporter of China (Mainland) Grease Guns products.    We have exported products to many other countries, such as North America South America Eastern Europe Southeast Asia Africa Oceania Mid East Eastern Asia Western Europe. We are absolutely capable of meeting various demands from the market. Importantly, to put quality consisting of product quality and service quality in the first place is our business!    We invite you to visit our website and deliver your inquiries to us!We look forward to serving you!Please visit our website at www.dlnb6.com for complete informations about our company!
Hot Searches: Fire Supplies ,Fire Hoses ,Foam Fire Hoses ,Camry Key Shell ,Fleece Key
Send Inquiry to this Supplier
Dalian No. 6 Acid Proof Pump Factory
Mr. wenbo dou
4 Lazishan New Village, Xinzhaizi Street, Ganjingzi District, Dalian

Copyright © 2010 Wholesale lots. All rights reserved. Contact Us:tonyluo2005@gmail.com

Processed in 0.12069 second(s)