Xianyang Yuhua Rubber Products Co., Ltd.
 Automobiles & Motorcycles > Interior Accessories >  Inflatable seal without reinforcement

Inflatable seal without reinforcement

Brand Name:
JULONG
material:
pure rubber
Inflatable seal without reinforcement
 
Detailed Description
 


Inflatable seal without reinforcement is made of pure rubber materials, its inflation pressure is 60 to 80 KPa.

 

        Inflatable seal without reinforcement is made of pure rubber materials, its inflation pressure is 60~80KPa, it is applied into ordinary sealing- occasions.

 

1. Main materials

1> If there is no special requirements, inflatable seal is usually made of the mixed materials of NR and synthetic rubber, its service temperature ranges from -55oC to +80oC, and sealing agents are water, air or other inert gases.

2> If the seal needs to contact with oil, organic solvent, etc., it can be made of certain rubber materials which are resistant to those agents. Its service temperature ranges from -30oC to +80oC.

3> If the inflatable seal is required to use at the temperature of -55oC to +180oC, it can be made of silicon rubber.

 

2. Installation and use

1> In order to avoid from hurting or puncturing the seal, the groove for installing the seal should be smooth and even.

2> The sealing surface contacted with seal should be clean and smooth and have no groove or pit that may affect sealing effect.

3> Sealing inflation pressure should be controlled in certain pressure ranges, over-high inflation pressure will lead to seal bursting, and over-low inflation pressure will spoil sealing effect.

4> During operation, its appearance should be checked regularly; seal should be changed timely if some abnormal phenomena such as surface cracking, becoming harder or breaking appear.

5> Under normal conditions, the service life of inflatable seal is 3 years; it should be replaced in time when service life expires.

 


We promise to offer you the right Inflatable ring/seal with best price and best service!We can also produce according to your requirement.We not only promise the good quality but also stable quality . Customer no need usually change suppliers again!If you have any problems about details please contact us.


Company information:
    Xianyang Yuhua Rubber Products Co., Ltd. ,established in 2005 . We is an exporter of China (Mainland) Seat Cushions products.    Our products always sell well in the worldwide markets, including Eastern Europe Southeast Asia Mid East Eastern Asia Western Europe. our company has perfect quality management systems and quality detection methods.    We hope that we can cooperate with more customers from all over the world and sincerely welcome all of you!Please, have a look at our website on www.yuhuarb.com!.
Hot Searches: Square Laser Level ,Point Laser ,Vertical Laser Plumb ,Line Laser Red ,Vertical Rotary Laser
 
Send Inquiry to this Supplier
 
Xianyang Yuhua Rubber Products Co., Ltd.
Mr. fengju yu
High-tech District, Xianyang City
86-29-13509102334
13509102334

Copyright © 2010 Wholesale lots. All rights reserved. Contact Us:tonyluo2005@gmail.com

Processed in 0.12069 second(s)