Guangdong Yatu Chemical Co., Ltd.
 Automobiles & Motorcycles > Car Care Equipment >  polyurethane paint

polyurethane paint

Main Raw Material:
Polyurethane
Usage:
Car Paint
Application Method:
Spray
State:
Liquid Coating
Brand Name:
YATU EASICOAT
Certification:
ISO9001, ISO14001
polyurethane paint
 
Detailed Description
 


polyurethane paint/Car paint/Paint
1) High hardness
2) Good gloss and Long lasting
3) Good resistance
4) good coverage

polyurethane paint/Car paint/Paint

EASICOAT Top Coat--2K Solid Colors

Substrates: Dried and sanded existing finishes, EC 1K or 2K Primers

Surface Cleaning: Remove wax, silicon and other contaminations with degreaser.

 

Mixing Ratio:

<18°C 

EC-2K Solid Colors 100 parts

EC-801Fast Drying Hardener 50 parts

M-1 Thinner 5-20 parts

 

18-24°C

EC-2K Solid Colors 100 parts

EC-802 Standard Hardener 50 parts

M-1 or M-2 Thinner 5-20 parts

 

25-30°C

EC-2K Solid Colors 100 parts

EC-802 Standard Hardener 50 parts

M-2 or M-3 Thinner 5-20 parts

 

>30°C

EC-2K Solid Colors 100 parts

EC-803 Slow Drying Hardener 50 parts

M-3 Thinner 5-20 parts

 

Pot Life: EC-801 Fast Drying Hardener: 2 hours, 25°C; EC-802 Standard Hardener or EC-803 Slow Drying Hardener: 4hours, 25°C

 

No. of Coats: 2-3 coats, 40-60um

 

Flash-off Time: At 25°C, 5-10 minutes between coats, allow 15-20 minutes flash-off time before baking

 

Spray Gun & Pressure

 

Gravity Feed  1.2-1.5mm  3-5kg/cm2

Siphon Feed  1.4-1.7mm  3-5kg/cm2

 

Drying Time:

Temperature    Dust Free       Tack Free      Dry to Handle    Thorough Dry

25°C          40 minutes      1-2 hours      8 hours           7days

70°C          5 minutes       10 minutes    20 minutes        60 minutes

 

Shelf Life: 2 years in original sealed can at cool and dry place at 20°C

 

Packaging: 1L, 3.75L

 

Note:

1. Remains of water in the sanding marks is harmful to the property of paint film. If the substrate is prepared with P800-1000 wet, blow dry the surface with spary gun.

2. At temperature lower than 15°C, air-dry at ambient temperature is not recommended. Allow a full bake at 60°C.

3. At ambient temperature higher than 30°C, add Retarder Solvent into thinner to avoid blushing. Details please refer to the technical data sheet of Retarder Solvent.

4. In the event of fisheyes during application, add 0.5-1% Anti Silicon in the paint remained and re-spray the affected area.

5. In the overspray area of new and existing finish, apply directly Thinner SRA to achieve an invisible transition. Details please refer to the technical data sheet of Thinner SRA.

6. The products mixed with hardener should be used up soon and can not restore for future use.

7. Clean equipments immediately with solvent after application.


We promise to supply you with high quality Car Paint!We can also produce according to your requirement.We promise our customers best price!If you have any problems about details please contact us.


Company information:
    Our company name is Guangdong Yatu Chemical Co., Ltd. Which established in 1995 . We is an exporter of China (Mainland) Spray Booths products.    Our products are mainly sold to North America South America Eastern Europe Southeast Asia Africa Oceania Mid East Eastern Asia Western Europe! We have a perfect quality management system to ensure the quality of our products.    To pursue high quality and meet customers' demands are our perpetual promises. We sincerely invite you as our good friends to visit us.For information and products order please visit our website www.yatupaint.com!
Hot Searches: Small Rubber Wheel Machine ,A&k Alignment ,Cat-401 ,Energy Alignment ,Software Quality Standards
 
Send Inquiry to this Supplier
 
Guangdong Yatu Chemical Co., Ltd.
Ms. Crystal Teng
Sanlian Industrial Area 2,Gulao, Heshan
86-750-8773826

Copyright © 2010 Wholesale lots. All rights reserved. Contact Us:tonyluo2005@gmail.com

Processed in 0.12069 second(s)