Kanglong Refining Casting Co., Ltd.
 Automobiles & Motorcycles > Motorcycle Accessories >  gate lift for wing body truck

gate lift for wing body truck

Place of Origin:
China (Mainland)
Brand Name:
ZHULI
Model Number:
KL-ZLQ-1
Truck gate assist:
Power gate assist
gate lift for wing body truck
 
Detailed Description
 


Mechanical design, substitutes the hydraulic pressure system for truck gate lifting use, saves cost a lot

gate lift for wing body truck

 

At present, the connection structure between truck gate and motherboard is hinge. It is very toilful to open and close because the truck gate is long and heavy. In order to be opened and closed by manpower, a truck gate with more than ten meters length is made up with 5 to 6 pieces by manufacturers. It is inconvenient for truck drivers and comparative toilful for manufacturers to make. There is hydraulic pressure system as a gate lift. But its cost is very high, and hydraulic pressure system needs to be maintained regularly during use because of the life limitation of sealed cushion and the complexity of operating system and power elements. The relevant components were easily damaged because of improper operation, which often brings very large maintenance cost.
 

By applying mechanics principles, our company researched and developed a carriage side door open-close auxiliary device------truck gate lift, it has following advantages:

 

One gate lift can lift gate weight up to 120kg-150kg. It makes lifting heavy trailer and truck gates incredibly easy, and have 10 years safe use record! (How many gate lifts needed for one gate is based on the truck gate weight and size).

 

It substitutes the hydraulic pressure system for lifting use, saves cost a lot!

 

It is small size design, a space with 600mm width and 200mm depth under the motherboard is ok for installation.

 

It is easy and fast to be installed, you only need to drill holes for screws and tighten them according to the parameters on the installation manual.

 

Its inserter pin is with fixed structure, it is safe, pollution-free, do not need maintenance cost.

 

The gate lift is designed for heavy gates of trailer trucks, wing body trucks, mobile stage trucks, half trailer trucks, coal transport trucks etc, and all carriages which have protection board with rotary shaft (such as hinge), and side gate which will be 180 or 90 degrees raised and lowered.


We promise to offer you the right spring truck gate lift(power hinge) with best price and best service!We can also produce according to your requirement.We promise our customers best price!If you have any problems about details please contact us.


Company information:
    Kanglong Refining Casting Co., Ltd. was found in 1999 . We is an exporter of China (Mainland) Motorcycle Helmets products.    With independent export rights, our products have been exported to North America Eastern Europe Western Europe Northern Europe Southern Europe, etc. All of our products comply with international quality standards and are popular in various markets around the world.    To pursue high quality and meet customers' demands are our perpetual promises. We sincerely invite you as our good friends to visit us.
Hot Searches: Wacker ,Is The Rammer ,Gasoline Earth Rammer ,Tamping ,Rammer To
 
Send Inquiry to this Supplier
 
Kanglong Refining Casting Co., Ltd.
Ms. Hsiu mei
Qianhuang Industrial Park, Gushan, Yongkang, Zhejiang, China
0086-579-81051187
13357045800

Copyright © 2010 Wholesale lots. All rights reserved. Contact Us:tonyluo2005@gmail.com

Processed in 0.12069 second(s)