Durabelt, INC.

Drive and Idler Pulleys

Place of Origin:
Ohio, United States
Brand Name:
DuraBelt Spools
Fiberglass reinforced nylon 66:
Many bore adapters
Drive and Idler Pulleys
Detailed Description

Nylon Pulleys Reinforced with Fiberglass -- both drive pulleys and idler pulleys with ABEC-1 ball bearings
  1. Rugged. Our plastic pulleys are used in the hostile environment experienced by commercial lawn mowers where high speeds (3600 rpm) and high temperatures (170°F) far exceed stresses encountered in most conveyors. Even under such severe conditions, our molded-in bearings and will not separate from the fiberglass-reinforced nylon rim.

  2. Molded-in bearings extend belt life. Molded-in bearings on our idler pulleys are more precise than pressed-in bearings and drive adapters. Pressed-in bearings may slip from side to side by as much as 1/16", meaning adjacent idlers can be out of line by 1/8". The resulting misalignment can cause premature belt wear. Our bearings and drive adapters do not slip. True-running idlers extend belt life.

  3. Higher Quality and Lower Prices. The production of molded-in bearings requires fewer steps. This facilitates automation, improves quality, and reduces costs. Consequently, our prices are very competitive.

  4. Pulley TIR (Total Indicated Readout)  0.020" Max


High-grade plastic nylon pulley (sheaves) are reinforced with fiberglass. Standard bearings are imported 6203-2RS that are rated A.B.E.C.-1 precision and have radial seals. U.S. made bearings are also available. Bore adapters are sintered powdered metal. Bearing grease is Chevron SRI-2 or the equivalent, which has an operating temperature range of -20° to 350° F, complies with Mil-Spec MILG3545G, and passes ASTM D 1743-73 rust test with 5% synthetic sea water.

Bearings with seals are standard and are better for dirty environments.

Bearings with shields are available but must be specified when ordering. Shielded bearing turn easier, so they put less strain on motor and belts. Most roller conveyors use shielded bearings.

We promise to offer you the right Pulleys with best price and best service!We also accept special order about the products. If you are interested in our products. Please do not hesitate to let us know.We are pleased to give you the detailed information.We promise timely delivery, short lead time and good after sell service.We are sincerely looking for your cooperation.

Company information:
    Durabelt, INC. ,established in 1988 . We is an exporter of United States Other Material Handling Equipment products.    We have exported products to many other countries, such as North America South America Eastern Europe Southeast Asia Africa Oceania Mid East Eastern Asia Western Europe. With a well management system, Sisale strives to offer the best quality products and service as possible as we can, as we believe quality is the value of company. Our motto is 'good quality, competitive prices, and efficient delivery'.    We take this opportunity to invite you to become our partner!All detail for concern the company are illustred in our website www.durabelt.com!
Hot Searches: Laundry Finishing Machine ,Stenters ,Fabric Untwister ,Hot Finishing Machine ,Used Dyeing Finishing Machinery
Send Inquiry to this Supplier
Durabelt, INC.
Mr. Jim Hammond
2909 Scioto Darby Exec. Ct.

Copyright © 2010 Wholesale lots. All rights reserved. Contact Us:tonyluo2005@gmail.com

Processed in 0.12069 second(s)