Fornovogas srl - CNG refueling station
 Automobiles & Motorcycles > Car Care Products >  CNG Compressor 200

CNG Compressor 200

Model Number:
CNG compressor 200
Type:
Reciprocating
Power Source:
DC Power
Lubrication Style:
Oil-free
CNG Compressor 200
 
Detailed Description
 


The gas is compressed through a reciprocating compressor, single or double acting; Equipped with cyl

!!PAY ATTENTION:---->> FOR THE QUOTATION PLEASE REQUIRE OUR MODULE AND WE'LL REPLAY YOU ASAP <<----!!

The gas is compressed through a reciprocating compressor, single or double acting; Equipped with cylinders (where the inlet gas is compressed up to distribution pressure) easily adjustable to any suction pressure and capacity needs. The crankcase, filled with lubricating oil, is geometrically separated from gas side (cylinders) via two seal groups by wich possible leakages are deviated in vent line. The unit is also equipped with forced lubrication circuit and cooling circuit; The latter can be either made by air or liquid. Compressor drive can be achieved either through direct coupling or through "V" belts. The speed of compressor driver (electric motor) can be regulated through inverter to immediately adequate compressor capacity to the required values.
The small capacity 200 Series compressors are constructed by the same standard as the 300 Series, differing only in size. The long period of operational testing at the Traversetolo station is conducted on units whose suction pressure may be calibrated in the field of 3-5 barG, with entry temperatures between-6 and 10 & ordm; C, and a delivery pressure in the field of 60-250 barG. Consequently, the flow rates may vary between 60 and 100% of the nominal flow and the absorbed power ranges between 75 and 100% of the nominal one.
The architecture of the 3 non-lubricated cylinders is a W-type arrangement at 60 & ordm; Whose pistons are driven by a cross-head assembly. The crank mechanism for the 200 Series is also pressure-lubricated. The maximum nominal power is 55 kW and the maximum nominal flow rate is 1, 000 Sm3 / h.
Main features:
- High efficiency
- Minimum compression costs
- Reduced vibration level
- Minimun manteinance costs
- Non lubricated cylinders
- No need of blow-down volume thanks to pneumatic valve lifters
- Reduced electric motor starting current
- Minimum space required for installation
- Optional "oil free" configuration
- Optional API 618 design


We promise to offer you the right Air-Compressing & Air-Separation with best price and best service!We have confidence that you will satisfy with our products and service.We carefully select material of each part to promise our products quality.Above items are just a part, many more Cisco products are not listed out, please feel free contact us for more details. Thank you for your attention


Company information:
    Fornovogas srl - CNG refueling station was established in 1969 . We is an exporter of Italy Car Care Products products.    With independent export rights, our products have been exported to North America South America Eastern Europe Southeast Asia Africa Oceania Mid East Eastern Asia Western Europe, etc. The aim we pursue is to be the best in quality & price, and we always have been devoted to our customers for their requirements!    We sincerely invite you to visit us!Please look at our website at www.fornovogas.it for detail information of our company activities.
Hot Searches: Designer Style Steel Rails ,Tinplate For Oil ,Galvanized Iron Tinplate ,Tinplate For Food Can ,Aerosol Spray Tinplate Can
 
Send Inquiry to this Supplier
 
Fornovogas srl - CNG refueling station
Mr. gaber ali
Via Due Canali
39-328-9499312
00393289499312

Copyright © 2010 Wholesale lots. All rights reserved. Contact Us:tonyluo2005@gmail.com

Processed in 0.12069 second(s)