Fornovogas srl - CNG refueling station
 Automobiles & Motorcycles > Car Care Products >  CNG Compressor 300

CNG Compressor 300

Place of Origin:
Model Number:
Power Source:
DC Power
Lubrication Style:
CNG Compressor 300
Detailed Description

The gas is compressed through a reciprocating compressor, single or double acting; Equipped with cyl


The gas is compressed through a reciprocating compressor, single or double acting; Equipped with cylinders (where the inlet gas is compressed up to distribution pressure) easily adjustable to any suction pressure and capacity needs. The crankcase, filled with lubricating oil, is geometrically separated from gas side (cylinders) via two seal groups by wich possible leakages are deviated in vent line. The unit is also equipped with forced lubrication circuit and cooling circuit; The latter can be either made by air or liquid. Compressor drive can be achieved either through direct coupling or through "V" belts. The speed of compressor driver (electric motor) can be regulated through inverter to immediately adequate compressor capacity to the required values.
Before being put on the market, the large-capacity 300 Series compressors with single-or double-acting cylinders were operationally tested for a long period in the station at Traversetolo. The testing, which goes on for an unlimited time at constant maximum rotation speed, is extremely tough, because it alternates intermittent service typical of filling stations with constant delivery required to fill up cylinder and tank trucks. During operation, the suction pressure may be calibrated in the field of 5-11 barG, the entry temperature may vary between-6 and 10 & ordm; C, the delivery pressure may be set in the field of 60-250 barG. Consequently, the flow rates vary between 45 and 100% of the nominal flow and the absorbed power ranges between 70 and 100% of the nominal one.
The architecture of the 3 non-lubricated cylinders is a W-type arrangement at 60 & ordm; Whose pistons are driven by a cross-head assembly. The crank mechanism is pressure-lubricated by oil. The maximum nominal power is 250 kW and the maximum nominal flow rate is 4, 200 Sm & sup3; / h.
Main features:
- High efficiency
- Minimum compression costs
- Reduced vibration level
- Minimun manteinance costs
- Non lubricated cylinders
- No need of blow-down volume thanks to pneumatic valve lifters
- Reduced electric motor starting current
- Minimum space required for installation
- Optional "oil free" configuration
- Optional API 618 design

All this kind Air-Compressing & Air-Separation, we promise will offer the best price by the good quality in china!We also accept special order about the products. If you are interested in our products. Please do not hesitate to let us know.We are pleased to give you the detailed information.We promise you with the finest price,high quality and best service.We are sincerely looking for your cooperation.

Company information:
    Fornovogas srl - CNG refueling station was established in 1969 . We is an exporter of Italy Car Care Products products.    With independent export rights, our products have been exported to North America South America Eastern Europe Southeast Asia Africa Oceania Mid East Eastern Asia Western Europe, etc. The aim we pursue is to be the best in quality & price, and we always have been devoted to our customers for their requirements!    We sincerely invite you to visit us!Please look at our website at for detail information of our company activities.
Hot Searches: Pipe Railings ,Din Rail Ac ,Designer Style Steel Rails ,Tinplate For Oil ,Galvanized Iron Tinplate
Send Inquiry to this Supplier
Fornovogas srl - CNG refueling station
Mr. gaber ali
Via Due Canali

Copyright © 2010 Wholesale lots. All rights reserved. Contact

Processed in 0.12069 second(s)