Shangyu Xingxing Lighting Equipment Manufacture Co., Ltd.
 Lights & Lighting > Other Lights & Lighting Products >  12V-1700mA Residential Outdoor Lighting

12V-1700mA Residential Outdoor Lighting

Brand Name:
Model Number:
Light Type:
Protection Level:
Rated Power:
12V-1700mA Residential Outdoor Lighting
Detailed Description

12V-1700mA Residential Outdoor Lighting
1. Long lifetime
2. Super energy saving
3. CE approved
4. Environment friendly

12V-1700mA Residential Outdoor Lighting 


Features Specification:

Item No


Operating voltage





Spray paint/plating

Outstanding feature

Rainproof, shockproof, corrosionproof

Constant current


Lighting Range






Bulb type


Single bulb power


Rated output power


Energy saving


Lights per set(pcs)


Light color

Warm white

Light source

Low energy consumption, low light regression, no frequent flashing, good light distribution



Sales Market

Europe, USA, Africa, Middle east, Egypt

Rated output voltage


Protection Rank





>50,000 hours

Working temperature




The safe and easy way of brightly illuminate your garden at night. Perfect for lighting borders, paths, patios and driveways.

The garden lighting is done in such a manner that lighting extends & illuminates the entire garden. Most innovative ideas can be applied for highlighting the garden’s beauty. These help brighten up the space with exquisitely crafted decorative lamps and lanterns. Subtle placing of lightings also gives a new connotation to the garden area, adding on to the peace & tranquility of the area.



Inner box(cm): 16*10*36.5

Outer box(cm): 51*38*34

Qty(pcs/cn): 10

20‘FC(pcs): 4208

40'FC(pcs): 8717

40'HQ FC(pcs): 10220


Payment method:

TT 30% advanced payment, the balance to be paid before payment or by irrevocable letter of credit.


Lead time:

Depend on the volume of the order, usually within 30 days from the receipt of advanced deposit.


FOB Port:



  1. 12V low voltage for safety and peace of mind.
  2. Set of 4 lights complete with 8m of cable and outdoor transformer.
  3. Pre-positioned lights for ease of installation-simply plug-in and switch on.
  4. Stylish, contemporary design.



Installing you garden bollard kit is quick and simple. Please take your time installing these lights, and you will enjoy years of enhanced garden lighting.

Before connecting your lights to the cable position the transformer near the power outlet you plan to plug it into, however DO NOT connect the transformer at this stage.

Uncoil the cable and run the cable along your desired installation, and then begin to assemble the lights, and attach them to the cable per following steps:

1. Attach the plastic spike to the stem by pushing it into the bottom of the stem.

2. Remove the opal plastic diffuser by holding it firmly, and carefully pulling out.

3. Using a soft coth, Insert the light globe; 12V 5W (MAX) Wedge Globe, by aligning the globe with the lampholder, and pushing in firmly.

4. Reattach the opal diffuser by inserting it into the Stainless steel tube, and pushing in firmly. It is important that the diffuser is installed correctly to ensure no water can enter the light.

5. Repeat the above procedure for all lights in the kit.

6. Connect the fitting to the 12V-supply cable. Ensure the connected transformer is disconnected prior to connection. NEVER overload the transformer by adding more lighting than it’s designed for.

NB: There is no correct side of the supply cable to connect to, that is, there is no prescribed positive or negative that needs to be matched at each light. The exposed end of the cable must not lie exposed underground or be allowed to become wet since this would create a short out and damage the transformer. Make sure the cable end is sealed with silicone or insulation tape before burying underground.

7. Unscrew the top of the connector block as pictured in Figure 1.

8. Run the cable from the transformer through the channel of the connector block as per Figure 2.

9. Using the handle of the screwdriver, push the cable down onto the metal pins ensuring that the cable is aligned so that each pin pierces each side of the cable. DO NOT use your fingers to push the cable onto the pins.

10. Screw the connector block back together making sure that the metal spikes have pierced the plastic around the cable.

11. Once fully assembled the bollards can now be spiked into the ground. The plastic spike is not built to withstand heavy impacts with rocks; you may have to remove any rocks that prevent penetration of the spike into the topsoil.

12. Once all of the bollards have been positioned into the ground, plug in the transformer into the wall outlet and ensure that each of the bollards are working.

NB: If one or more of the bollards are not working, repeat steps 7 to 10, to ensure the cable has been correctly

pierced by the metal spikes.

13. When all bollards are working, and you are satisfied with your garden lighting, simply push the cable into the

ground, and cover with topsoil for a neat and tidy finish.


There is no “correct” side of the included cable, that is there is no prescribed positive and negative that need to be matched to each light, however you must ensure that the exposed end of cable is suitably terminated with connectors.


  • · Do not allow transformer or connections to become wet.
  • · Never allow the transformer to become wet or be exposed to liquids of any kind. Naturally your cable and Bollards will be subjected to rain and moisture, and have been designed to efficiently protect electrical parts from exposure. This is not so for the transformer which must always be kept dry.
  • · The transformer supplied may differ slightly to the model shown.


For any further information, please feel free to contact us by email or telephone. We warmly welcome new and old customers throughout the world.


All this kind Garden Light, we promise will offer the best price by the good quality in china!All items we are selling are best quality among the similar products.All items will be strict tested before shipping!We promise the high quality but the low price . Welcome to discuss the business.We are sincerely looking for your cooperation.

Company information:
    Shangyu Xingxing Lighting Equipment Manufacture Co., Ltd. established on 2003 in Japan. We is an exporter of China (Mainland) Other Lights & Lighting Products products.    Our products have been sold well in North America South America Eastern Europe Southeast Asia Africa Oceania Eastern Asia Western Europe! Quality and Safety We have implemented a strict and complete quality control system, which ensures that each product can meet quality requirements of customers.    We take this opportunity to invite you to become our partner!
Hot Searches: Drive Constant ,Independent Container Lines ,Operating Systems Structure ,Flexible Motor Head ,Engraved Medium
Send Inquiry to this Supplier
Shangyu Xingxing Lighting Equipment Manufacture Co., Ltd.
Mr. Jack Ning
Toushe, Buaiguan District, Shangyu

Copyright © 2010 Wholesale lots. All rights reserved. Contact

Processed in 0.12069 second(s)